LiitoKala Lii-100 lii-202 lii-402 lii-S1 Lii-S2 lii-S4 1.2V 3.7V 3.2V 3.85V 18650 18350 26650 NiMH lithium battery smart charger

Main Features:

USB output function
: Built with 5V / 1000mAh output

Flexible size

: One-slot charging and management system, Micro USB DC 5V input port, portable to carry around

500mAh, 1000mAh
charging current for selection

CC / CV charge mode

applies to the battery to maintain a constant current flow and protect battery and users’ safety

LED indicators

display the charging status 25pct – 50pct – 75pct – 100pct

When you charge LiFePO4 or 3.85V battery, must fix the charging mode: Identifies 1.2V Ni-MH / 3.7V Li-ion battery automatically and

select manually for 3.85V battery Li-ion and LiFePO4 battery

Refresh function for
0V battery

Protections:

over-charge, over-discharge, reverse polarity, short circuit protections

Identify
dead or bad
batteries

Parameters:

Constant charging with cut-off current less than 100mAh

Output voltage

: 1000mAh and output voltage is 4.75 – 5.25V

Cut-off voltage
for output: 3.0 +/- 0.1V

Standby current
: No more than 15mAh

Output current:
500mAh / 1000mAh

Cautions:

1. Cant charge battery type of 1.6 – 2.2V

2. Batteries are not included

Packing list:

1 x Liitokala Lii-100 charger
not includ battery

1 x USB canble

1 x Manual

Description:

LiitoKala Lii-202

is a smart universal charger that is capable of charging almost all Li-ion, Ni-MH, NiCd batteries. It can detect battery type and charge the battery automatically under your selected charging current. The Lii-202 features a Micro USB input port and a general USB output port. With LED indicators, you can read the charging process clearly. The built-in protection circuit allows you to charge your batteries without considering safety problems. Designed for portable, flexible and multifunctional, the LiitoKala Lii-202 is your smart assistant when you are at home or traveling.

Main Features:

2 independent charging channels with built-in micro-computer management system to ensure the high efficiency

Micro USB input; USB 5V 1A output port for charging your mobile phones

Two charging current options: 0.5A, 1A

Charging modes: constant current and voltage

LED indicators show the charging process and battery type

Detects battery type and charge the battery automatically under your selected charging current

Identifies broken batteries, 0V rechargeable battery activation, dont charge 1.65 – 1.85V batteries

Built-in protection circuit, with over-charge protection, over-discharge protection and short circuit protection

Parameters:

Compatible with:

Li-ion:

10440, 14500, 16340, 17355, 17500, 17670, 18490, 18650, 22650, 26500, 26650

Ni-MH and NiCd:
A, AA, AAA, SC

Input voltage:
DC 5V

Input current:
2A

Output voltage:
4.35V / 4.20V / 3.65V / 1.48V

Output current:
0.5A / 1A

USB output:
5V, 1A

Specification :

1. Micro USB DC 5V input, four independent charging and micro computer management system

2. Four charging current mode 500mAh/700mAhn/1000mAh/2000mAh, 2000mAh current

mode is fixed only on the fourth slot

3. The LED indicators display the charging progress: 25 – 50 – 75 -100 and battery type size: Ni-MH 1.2V , Li-Fe 3.2V, Li-ion 3.7V, Li-ion 3.85V

4. Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.85V li-ion batteries

5. Refresh for OV battery. It don’t charge any battery of1.65 -1.85V refresh current can be detected only

6. Protection for over-charge and over-discharge and short circuit. Identify broken battery and polar reverse inspection

7. Charing under constant voltage and current

8. Input by DC interface and working voltage is 5V-2A Micro plug

9. Built with 5V/1000mAh USB discharge output function

Function:

1. Buttons : While electricity is connected, 1 press the button to change the battery type, it will start to charge 5 seconds after setting the battery type 3.2V or 3.85V, 1.2V Ni-MH and 3.7V li-ion ca be detected automatically, so it need set for only 3.2V and 3.8V batteries; 2 change the charging current amount 4 current at any time during charging by long press the button

2. LED: While connect it to 5V input, all LED light up immediately 1 If no battery is put in, 500mAh LED keeps on and others will go out. 2 When battery is detected in, 4 LED lights on AND 3.7V LED keep flicker to indicate to set the battery type, if no operation, it begin to charge 5 seconds later automatically under detection, four LED lights will display the charging status. 3 Tap the button .can show the battery type for 5 seconds. 4 No electricity is connected, insert a battery can quick shows the remaining battery volume.

3. USB output indicator: When USB discharging port detected, indicator of battery volume will light up for 10 seconds and go out, press button to light up again.

4. LED displaying graphic reference

Note
:

1. The charger can charge cylinder lithium ion batteries 3.7V and 3.8V, Ni-MH/Cd,

2. ferric phosphate lithium cellLiFePO4

3. Read this manual before use and pay special attention to the recommended charge current, must avoid to charge battery beyond the recommended current limit

4. 5V USB adapter adaptor current 2A is recommended

5. Cation heating while charging

6. Remove the charger from power source after charging complete, and remove the battery from the charger at the same time

7. For indoor use only

8. The displaying data for reference and refer to professional instrument for more accurate data

Packing list:

1 x Liitokala Lii-402 chargernot includ battery

1 x USB canble

1 x Manual

1 x Tracking no.

Photo display