Compatible Audio & Video Equipment Style | board |
---|---|
Certification | NONE |
Origin | Mainland China |
most hdd boards have the unique biosrom or nvram chip which includes the unique data to access the hdd system area. if the bios information is not compatible with your hdd, there is no way to read the hdds data. because of this, we should use the original pcbs bios when we swap pcb. bios chip swapping is a must. before you purchase, please read: 1 this is just a pcb printed circuit boards, not the whole hard drive; 2 pcb board number is printed on the board, not on the sticker; 3 these boards are used, not brand new, the circuit board components not falling, the interface did not break. all pcbs have been tested before shipping; 4 it is used for data recovery/repair issues, the pcb board has been tested and in good working condition. there is no refund/exchange policy; 5 hard drive failures are not always caused by pcb failure. we cannot guarantee your drive to be repaired by replacing the hard drive pcb; 6 you should swap the bios chip before you exchange the pcb board, as our guide sticker shown, in order to make the replacement board compatible with your hard drive; 7 it is the buyers responsibility to know whether the board is adequate for his hard drive model; 8 we do not suggest one who has no professional hard drive technology knowledge, and no tools no skills to buy this board, unless you can find someone to help you to repair the hard drive. we are only responsible for providing fully functional board.
We can deliver this product to everywhere of the world, PAYPAL is supported. Contact detail:
fangfuyi@hotmail.com
Main control chip large chip:
100319396
Drive motor: 100244097
Main control chip large chip:
100342861
Drive motor: 100343137
Main control chip large chip:
one hundred million two hundred and seventy-four thousand three hundred and sixty
Drive motor: 100244097
Plate number position
sometimes the shopkeeper is not online, but can take pictures directly. Then the shopkeeper will take the initiative to contact you, or send a text message to: 13417089500 Fang Fuyi MSN: fangfuyi@hotmail.com )
1.
The board on this link only needs the board number to be consistent with the master control, and there is no need to replace any other parts. The board can be recognized directly by hanging on the wall,
Friendly reminder: because our boards are shipped after repeated testing, they cant be used after receiving them. Most of them are disk problems. Therefore, the boards on this link are not returned. Please buy them carefully after confirming and agreeing.
2. If you need any hard disk circuit board, please contact us through Taobao Wangwang or QQ. We will help you check whether the hard disk circuit board is available and deliver goods to customers immediately. If there are special circumstances that cannot be delivered on the same day, we will contact you in time.
3. Ask the customer to determine whether it is the problem of the circuit board before purchasing the circuit board, because the fault of the hard disk is relatively complex, and it is not the problem of the hard disk that must be the problem of the board. Some hard disks seem to have a broken circuit board on the surface, but it is actually a disk fault, or both faults exist at the same time; Therefore, we do not guarantee that your hard disk will work normally after replacing our circuit board.
4. If the customer doesnt know much about the replacement of hard disk circuit board, our store can provide simple technology and try our best to solve the customers problems, but the professional technology of disk repair is not simple and clear, so we wont explain it in depth,
Please understand
Więcej podobnych produktów od innych sprzedawców
LILYGO® TTGO T-U2T USB To TTL Automatic Downloader CH340K
LILYGO® T-U2T USB To TTL automatic downloader CH9102Currently only compatible with Windows , Mac systems of 10.15 and below LILYGO T-U2T is the abbreviation of USB To TTL, The original intention of this product design is that every time you design an ESP32 circuit board, you will find that the same circuit of usb To TTL appears on the schematic, especially when designing a small-sized circuit. This circuit occupies a lot of space, and it also increases the cost, so we want to change it, Finally we discovered that each product also [...]
48.09 $ Add to cart40W/100W bluetooth amplifier (2/4ch) SSM3302 SSM3582
This amplifier board using ADI's class-D amplifier SSM3302, plus DSP ADAU1701 for EQ, crossover, limit, volume control etc. the optional boards are: 4 x 10W SSM3302 x 2 2 x 20W SSM3302 x 2 IN MONO 4 x 25W SSM3582 x 2 All board support analog in besides Bluetooth in mode also. There is a volume controller on the board, you can change the whole input volume. The output mode/EQ/crossover setting can be customized as you liked, please let me know if you want. The default setting is just 2ch in and copied to 4 ch out, my default EQ [...]
108.91 $ Add to cart- Sale!
HDD PCB st desktop hard disk 3.5 circuit board No.: 100291893
most hdd boards have the unique biosrom or nvram chip which includes the unique data to access the hdd system area. if the bios information is not compatible with your hdd, there is no way to read the hdds data. because of this, we should use the original pcbs bios when we swap pcb. bios chip swapping is a must. before you purchase, please read: 1 this is just a pcb printed circuit boards, not the whole hard drive; 2 pcb board number is printed on the board, not on the sticker; 3 these boards are used, not brand [...]
61.24 $ Add to cart - Sale!
Gold-plated DIP8 Mono To Dual OP Amp Adapter Converter Socket For AD797 AD847 OPA128 Chips
Gold-plated DIP8 Mono To Dual OP Amp Adapter Converter Socket Description: This is Assembled product. 100 Brand new and High quality Mono To Dual OP Amp Adapter Socket Using Taiwan nextron DIP8P Gold plated IC socket High-grade gold-plated double-sided PCB, Gold-plated double-headed round needle Suitable for AD797 AD847 OPA627 OPA134 OPA604 NE5534 OPA128 etc. Packing List: 1pcs x Mono To [...]
43.83 $ Add to cart - Sale!
UNI-T Infrared Thermal Imager UTi120S PCB Circuit Industrial Testing Floor Heating Tube Testing original genuine Thermal camera
Features ● infrared resolution: 120 × ninety● temperature measurement range: - 20 ~ 400 ℃● temperature measurement mode: center point, high and low temperature tracking● photo storage: 16GB TF Card● high and low temperature alarm: image, beep, LED flashing● laser indication / LED lighting● three prevention design: IP54 / two meter fall prevention● PC analysis software● six palette options● adjustable emissivity● the service time shall not be less than 9 hours● 3.7v/2600mah rechargeable lithium battery● bottom design ¼ Screw holes can be used with tripod Uti120s detailed description 1. WORLDWIDE SHIPPING.Except some countries and APO/FPO2. Orders processed timely after [...]
282.00 $ Add to cart - Sale!
3pcs r411b01_3v3 3.3v rs485 to lvttl rs232 transceiver converter sp3485 module for esp8266 raspberry pie breadboard banana pie
Product Name: R411b01_3v3_3pcs 3.3v Rs485 To Lvttl Rs232 Transceiver Converter Sp3485 Module For Esp8266 Raspberry Pie Breadboard Banana Pie Package inlcuded: 3 PCS R411B01_3V3 DC 3.3V RS485 to LvTTL RS232 converter Description: Read/write automatic control RS485 TO RS2323.3V TTL Logic level converter Operating Voltage : DC 3.3V Logic level : 3.3V LvTTL Logic level RS485 BUS IC : SP3485 Read and write automatic control IC :SM74HC04 7x 2.54MM pin Does not include pin ,mini size. Size : 17.9x11.7x2.8mm very small Weight :Only 0.7g Very light Application RS485 Temperature and humidity sensor PTZ camera LED controller MODBUS RTU RS485 Relay 485 [...]
47.04 $ Add to cart ExcelValley – Mono Patch Cable Splitter – TS 3.5mm 1/8" – Modular Synth Eurorack
ExcelValley - Mono Patch Cable Splitter - TS 3.5mm 1/8 - Modular Synth Eurorack Mono Audio Multi Splitter Adapter A passive 1 into 5 multiplier in a star shape. Suitable for your Eurorack modular synthesizer, or other general patching duties, where a mono 3.5mm cable is needed. Features Connect up to 5 devices to one source device - 6 Ports, 5 Way Nickel plated connectors provide high corrosion protection 3.5 mm adapter splits line into five 3.5 mm ports 1 input / 5 outputs any socket can be used as input Compatible with: Roland, Moog, Doepfer, Arturia, Korg Specifications Color [...]
50.48 $ Add to cart- Sale!
YAOGREENHAM jumbospot V1.3 MMDVM_HS_Dual_Hat Duplex Hotspot Board kit With USB Port Support P25 DMR YSF NXDN For Raspberry pi
New arrival :If you want to buy the finished MMDVM hotspot power bank ,please click this link The default bit error rate is less than 5, and the default offset is 0. If the bit error rate is more than 5, as long as the signal can be received, it can be corrected by offset. 1.Latest version V1.3, and the firmware is latest 2. original cystal : Original from USA Duplex variant of MMDVM_HS_Hat This PCB uses the MMDVM_HS . It has two ADF7021 onboard and allows for duplex operation with two [...]
85.70 $ Add to cart - Sale!
HW-882 2S 3A 7.4V 8.4V 18650 Lithium Battery Charger Protection Board BMS Module
HW-882 2S 3A 18650 Li-ion Lithium Battery Charger Protection Board BMS Module 7.4V 8.4V Feature: 2S 7.4V/8.4V 18650 lithium battery protection board, suitable for protecting two rechargeable li-ion/lithium polymer batteries in series from overcharge and overdischarge. Specification: Charging voltage: 8.4V-9V Maximum working current: 3A Maximum instantaneous current: 5A Quiescent current: less than 3uA Internal resistance: less than 45mΩ Over-discharge voltage range: 2.3-3.0V ±0.05V Overcharge voltage range: 4.25-4.35V ±0.05V Short circuit protection: it can be protected and needs to be recharged Product size: 36 x 6 x 2mm Product weight: 3g Packing size: 50 x 50 x [...]
40.46 $ Add to cart - Sale!
DC-DC Step-UP Power Module 2-24V to 2-28V SX1308 Voltage Boost Adjustable Board
DC-DC 2-24V to 2-28V Step-UP Power Module SX1308 2A Adjustable Voltage Boost Converter Board Features: Oscillation frequency 1.2MHz, efficiency is as high as 95 Circuit has short circuit protection, overheating protection function. 10k to adjust potentiometer, adjust the output voltage. Description: 1: VIN cathode voltage input 2: GND anode voltage input 3: GND anode voltage input 4: OUT cathode voltage output, the 2 GNDs are intercommunicated, and the pads of the four voltage input/output terminals are 4mm x 4mm pads, and the through hole diameter is 1mm. 5: 10K adjust potentiometer, choose the output voltage [...]
40.46 $ Add to cart
Reviews
There are no reviews yet.