Dimensions (WxHxD)) | / |
---|---|
Weight | / |
Model Number | BMS |
Compatible Audio & Video Equipment Style | Digital - to - Analog Converter (DAC) |
Origin | Mainland China |
Certification | CE |
Feature 1 | 18650 battery |
Feature 2 | 18650 |
Feature 3 | bms 2s |
Feature 4 | 2s bms |
Feature 5 | converter 7.4v |
Feature 6 | rechargeable battery charger |
2S 3A 7.4V 8.4V 18650 Lithium Battery Charger BMS Protection Board HW-882 for Protecting Two Rechargeable Li-ion/lithium Polymer
40.59 $
13594 in stock
HW-882 2S 3A 18650 Li-ion Lithium Battery Charger Protection Board BMS Module 7.4V 8.4V
Feature:
2S 7.4V/8.4V 18650 lithium battery protection board, suitable for protecting two rechargeable li-ion/lithium polymer batteries in series from overcharge and overdischarge.
Specification:
Charging voltage: 8.4V-9V
Maximum working current: 3A
Maximum instantaneous current: 5A
Quiescent current: less than 3uA
Internal resistance: less than 45mΩ
Over-discharge voltage range: 2.3-3.0V ±0.05V
Overcharge voltage range: 4.25-4.35V ±0.05V
Short circuit protection: it can be protected and needs to be recharged
Product size: 36 x 6 x 2mm
Product weight: 3g
Packing size: 50 x 50 x 10mm
Gross weight: 3g
Note:
There may be slight size deviations due to manual measurement, different measuring methods and tools.
The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.
1 X Battery Protection Board
Więcej podobnych produktów od innych sprzedawców
- Sale!
Tuya Smart Life 3 Phase Wifi Energy KWH Meter 80A 120A Power Clamp Current Transformer App Monitor
Support Dropshipping and Wholesaling. 100 Original and Good Quality with Free After-sale Warranty. 1. It's high Amp item, and the device needs certified and professional electrician for wiring.2.The frequency of the wireless router is 2.4GHz.3. The meter requires the measured device must have neutral wire. otherwise it can't measure the device's voltage, current, and power.Material: plasticcolour: As shownPackage Contents:1 x 3 Phase WiFi Energy KWH Meter80A/1 x 3 Phase WiFi Energy KWH Meter120AOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a [...]
135.00 $ Add to cart - Sale!
DC-DC 600W 10-60V to 12-80V Boost Converter Step-up Notebook Power Supply Module
Specification: Input voltage: 12V-60V Input current: maximum input current 15A Output voltage: 12v-80v continuously adjustable Output current: maximum output current 10A adjustable Output power: effective power P = input voltage V x 10A Conversion efficiency: up to 95 input voltage and current; output voltage and current affect conversion efficiency Short circuit protection: fuses Module size: 73 x 51 x 32mm/2.87 x 2 x 1.25 Weight: 177g Module nature: non isolated boost module boost Input voltage: 12-60VDC input for wide input voltage range applications Input current: 15A max over 10A, please strengthen heat dissipation Static working current: 15mA [...]
53.50 $ Add to cart 40W/100W bluetooth amplifier (2/4ch) SSM3302 SSM3582
This amplifier board using ADI's class-D amplifier SSM3302, plus DSP ADAU1701 for EQ, crossover, limit, volume control etc. the optional boards are: 4 x 10W SSM3302 x 2 2 x 20W SSM3302 x 2 IN MONO 4 x 25W SSM3582 x 2 All board support analog in besides Bluetooth in mode also. There is a volume controller on the board, you can change the whole input volume. The output mode/EQ/crossover setting can be customized as you liked, please let me know if you want. The default setting is just 2ch in and copied to 4 ch out, my default EQ [...]
108.91 $ Add to cart- Sale!
WD Digital desktop hard disk PCB 2060 800068 001 Rev P1 measured NEW
most hdd boards have the unique biosrom or nvram chip which includes the unique data to access the hdd system area. if the bios information is not compatible with your hdd, there is no way to read the hdds data. because of this, we should use the original pcbs bios when we swap pcb. bios chip swapping is a must. before you purchase, please read: 1 this is just a pcb printed circuit boards, not the whole hard drive; 2 pcb board number is printed on the board, not on the sticker; 3 these boards are used, not brand [...]
64.20 $ Add to cart - Sale!
HDD PCB st desktop hard disk 3.5 circuit board No.: 100291893
most hdd boards have the unique biosrom or nvram chip which includes the unique data to access the hdd system area. if the bios information is not compatible with your hdd, there is no way to read the hdds data. because of this, we should use the original pcbs bios when we swap pcb. bios chip swapping is a must. before you purchase, please read: 1 this is just a pcb printed circuit boards, not the whole hard drive; 2 pcb board number is printed on the board, not on the sticker; 3 these boards are used, not brand [...]
61.24 $ Add to cart - Sale!
HDMI To I2S Receiver IIS To HDMI Transmit Signal Conversion Board DAC Decoder
HDMI To I2S Receiver IIS To HDMI Transmit Signal Conversion Board DAC Decoder Description: It adopts four-channel CMOD circulation differential line receiver driver, which is designed for applications that require ultra-low power consumption and high data rate. The device uses low-voltage differential signaling LVDS technology and supports data rates in excess of 400Mbps 200MHz. Notice: 1. The HDMI to I2S receiver board cannot be used for the HDMI interface output of Blu-ray players, etc.; 2. The I2S to HDMI transmit board cannot be used for the HDMI interface input of power amplifiers, TVs, etc. Packing List: 1pcs x Module [...]
55.26 $ Add to cart - Sale!
ESP32 LoRa32 V2.1 1.6 Version 433/868/915MHZ LoRa ESP-32 OLED SX1276 ESP32 Oled-display BT Wireless WIFI Lora development board
TTGO LORA32 868/915Mhz 433MHz SX1276 ESP32 Oled-display BT Wireless WIFI Lora development board Adapter Board Features: 1.The antenna needs to be in connection with the IPEX interface if the antenna is not connected, the signal reception will be unstable 2.Lithium battery charge and discharge circuit, when the battery is full, the blue LED will stop working. When using, pay attention to the positive and negative of the battery, otherwise it will be damaged! 3.With IO port touch screen touch signal input, you need to add the 100nF pull-down capacitor to this pin 4.Support for Sniffer software protocol analysis, Station, [...]
85.51 $ Add to cart - Sale!
UNI-T Infrared Thermal Imager UTi120S PCB Circuit Industrial Testing Floor Heating Tube Testing original genuine Thermal camera
Features ● infrared resolution: 120 × ninety● temperature measurement range: - 20 ~ 400 ℃● temperature measurement mode: center point, high and low temperature tracking● photo storage: 16GB TF Card● high and low temperature alarm: image, beep, LED flashing● laser indication / LED lighting● three prevention design: IP54 / two meter fall prevention● PC analysis software● six palette options● adjustable emissivity● the service time shall not be less than 9 hours● 3.7v/2600mah rechargeable lithium battery● bottom design ¼ Screw holes can be used with tripod Uti120s detailed description 1. WORLDWIDE SHIPPING.Except some countries and APO/FPO2. Orders processed timely after [...]
282.00 $ Add to cart - Sale!
LILYGO® TTGO T-Beam V1.1 ESP32 NEO-M8N GNSS IPEX LoRa SX1268 433Mhz SX1262 868Mhz 915Mhz Wireless Module WiFi Bluetooth Board
T-Beam V1.1 SX1262 IPEX NEO-M8N GNSS Introduce: T-Beam V1.1 SX1262 IPEX NEO-M8N GNSS Version, change GPS / LoRa chip and LoRa antenna based on T-Beam V1.1. LoRa chip using Semtech SX1262 LoRa RF transceiver chip design, works in the 868/915MHz ISM frequency band, integrates a highly stable TCXO 32MHz crystal oscillator, half-duplex transceiver module, power up to +22dBm, to -139dBm receiving sensitivity. The LoRa antenna interface is changed from SMA to IPEX , which is more convenient to store. GPS chip using Semtech NEO-M8N GNSS chip design, also support GPS Beidou GLONASS, stronger positioning signal, The [...]
124.33 $ Add to cart ADAU1701 DSP Easy Start Board (P2P ADAU1401)
ADAU1701/1401 is a complete single-chip audio system with built-in control interfaces for 28 / 56-bit audio DSP, ADC, DAC, and similar microcontrollers. Signal processing technologies including equalization, crossover, bass enhancement, multi-band dynamic processing, delay compensation, speaker compensation, and stereo image widening can be used to make up for the practical limitations of speakers, amplifiers, and listening environments, thereby significantly improving the sound quality experience. This signal processing technology is comparable to that used in high-end studio equipment. Most processing is done in full 56-bit double-precision mode, resulting in excellent low-level signal performance. The ADAU1401 is a fully programmable DSP. With [...]
71.96 $ Add to cart
Reviews
There are no reviews yet.